Home Owner
Products
Architects
Products
SUB NAVIGATION
No-Rot
Timber Preserver
Grey Deck Cleaner
D-Mould


PRODUCTS FOR HOME HANDYMAN
EXTERIOR PINE CLEAR - EXTERIOR CLEAR TIMBER OIL FINISH
FOR TREATMENT OF SOFTWOODS

DESCRIPTION

EXTERIOR PINE CLEAR: A clear oil based exterior timber finish specifically formulated for use on treated pine. EXTERIOR PINE CLEAR takes away the normally dry treated pine look and its penetrating qualities give the timber a rich natural oiled look, which enhances the natural grain and beauty of pine. EXTERIOR PINE CLEAR has a powerful MOULDICIDE which prevents mould growth, timber blackening and discolouration. EXTERIOR PINE CLEAR contains water repellents which help stabilize the timber and reduce checking and movement thus overcoming many of the problems associated with using pine in service.

RECOMMENDED USES

EXTERIOR PINE CLEAR can be used wherever a clear protective exterior finish is required e.g. cladding, decking, pergolas, trellis and fencing etc. EXTERIOR PINE CLEAR is suitable for all treated softwoods such as Radiata Pine and Slash Pine.

DIRECTIONS FOR USE

Apply EXTERIOR PINE CLEAR over dry surfaces, free from dirt, grease and wax. Previously varnished or painted surfaces must be thoroughly stripped. Badly weathered surfaces should be sanded back or cleaned using a suitable wood cleaner containing oxalic acid or similar chemical before application. Apply the oil via brush, roller, spray or dip application. Apply one generous coat of EXTERIOR PINE CLEAR and allow a minimum of 24 hours drying time.

MAINTENANCE

Timber treated with EXTERIOR PINE CLEAR will not blacken when maintained regularly. However, over time and depending on the severity of exposure, the colour of the treated timber will fade. Repeat applications are simple as the timber can be re-oiled to bring back the timber texture. Areas which wear due to heavy foot traffic e.g. decks, doorways, steps, etc, can be touched up when necessary.

COVERAGE

(Dressed timber) approx. 10m2/Litre

(Rough sawn timber) approx. 6m2/Litre

CLEAN UP

Mineral turpentine.

PACKAGING

1,4,20 Litre cans. 200 Litre Drum

FIRST AID AND SAFETY DIRECTIONS

Avoid skin contact by wearing protective clothing. Don't breathe vapour of spray mist. If poisoning occurs, contact a doctor or Poison Information Centre (13 11 26).

Eyes

Hold eyes open, flood with water for at least 15 minutes.

Skin

Remove contaminated clothing and wash skin thoroughly with soapy water.

Inhalation

Remove to fresh air.

If Swallowed

DO NOT induce vomiting. Give a glass of water to drink and transport to hospital.

 

 
Privacy | Links | CONTACT Details | ©2006 Copyright Preschem Pty Ltd | Webmaster