DESCRIPTION
NO-ROT is a unique solid wood preservative used for the insitu treatment of timber to stop rot and white ant attack. It is a concentrated mix of fungicide and insecticide, combined together in a controlled release, small chalk like stick.
RECOMMENDED USES
NO-ROT can be used to treat all outdoor timber structures such as pergolas, timber decks, steps, fence posts and rails, window frames, etc. which are exposed to weather and the ingress of moisture. NO-ROT can also be used indoors where timber is subjected to moisture such as in bathrooms.
Timber which has existing decay can also be treated with NO-ROT to sterilise the timber and prevent further attack. All timber species can be treated with NO-ROT. NO-ROT will only be activated in the timber with a moisture content greater than 20%. Timber treated in this situation will also resist termite attack.
DIRECTIONS FOR USE
Drill one or two 9 mm (3/8 inch) hole 40 mm (1 3/4 inch) into the timber at the position where decay commonly occurs. Insert one No-Rot into each hole and seal holes with the wooden dowels supplied.
Under normal conditions the sticks should be replaced every 5-10 years.
TECHNICAL DATA
| Active
Ingredient |
120 g/kg Boron
110 g/kg Fluorine |
| Shape |
Solid
Stick |
| Size |
8
mm diameter x 30 mm long |
| Colour |
White |
| Odour |
Nil |
STORAGE AND SHELF LIFE
Store in a cool dry place in the original PVC container and out of the reach of children. NO-ROT sticks have an indefinite shelf life.
SAFETY DIRECTIONS
Use synthetic rubber (PVC) gloves when handling NO-ROT. May irritate the nose and throat. Avoid contact with eyes and skin. Do not inhale dust. Wash hands after use.
FIRST AID
If poisoning occurs, contact Doctor or Poisons Information Centre (13 11 26).
Is swallowed give milk or calcium carbonate. Seek immediate medical treatment.
If in eyes, hold eyes open flood with water for at least 15 minutes and see a Doctor.
|
