Preschem Polesaver Rods are recommended for the remedial treatment of centre rot and termite attack in standing poles and other timber structures subject to the ingress of water. The rods are able to deliver up to 1.3 kg/m3 of elemental fluorine in the treated zone. These loadings are more than adequate to inhibit most decay, fungi and insects.

Directions

In poles with a circumference of up to 950mm. Drill three equally spaced abaxial holes of 16mm diameter at about 20o to the vertical into each pole, each hole starting about 150mm above groundline, extending to 300mm below groundline. Drill four holes in poles with a circumference greater than 950mm.

Insert three Preschem Polesaver rods into each hole

Seal each hole with a tapered plastic plug.

Precautions for use

For use as a wood preservative. Avoid contact with skin and eyes. Use synthetic rubber/PVC gloves when handling. The material is non-flammable. Store in the closed original container in a cool, well ventilated position. Keep packages dry. Do not expose boxes to moisture or humidity. Do not store for prolonged periods in direct sunlight. Dispose of packaging at an approved disposal site.

Safety

Refer to Material Safety Data Sheet for instructions.