DESCRIPTION

AUSSIE CLEAR is an Exterior Clear Timber Oil finish that protects the timber from the weather. The penetrative quality of AUSSIE CLEAR allows the enhancement of the natural grain and beauty of all the timber giving the timber a natural oiled look. AUSSIE CLEAR stabilises timber as it repels moisture, reducing checking or splitting. No film is allowed to form, so peeling or cracking is never a problem. It also inhibits unsightly mould growth with its powerful mouldicide. AUSSIE CLEAR has been specially formulated and tinted to use on a range of hardwoods.

RECOMMENDED USES

AUSSIE CLEAR can be used wherever a clear protective exterior finish is required eg: decking, fencing, trellis and pergolas, weatherboards, window frames, furniture, cladding, facia, exposed beams etc. AUSSIE CLEAR is suitable for all popular timber including Cedar, Merbau, Jarrah, Cypress Pine, Oregon etc. AUSSIE CLEAR can be tinted with a universal tint however the product has been formulated with its own transparent pigment to appear clear on darker hardwood timbers. Use Preschem TREATED PINE CLEAR on CCA Treated Pine.

DIRECTIONS FOR USE

Apply AUSSIE CLEAR over dry surfaces, free from dirt grease and wax. Previously varnished or painted surfaces must be thoroughly stripped. Badly weathered surfaces should be sanded back or cleaned using a wood cleaner such as Preschem GREY DECK CLEANER. AUSSIE CLEAR can be applied by any convenient means, such as brush, roller, spray or dip application, however floors & decks are most easily applied with a lambswool applicator. Apply one coat of AUSSIE CLEAR, working it into the timber. Any excess oil, remaining on the surface after one hour should be wiped off. If the timber still looks dry, another application may be required. Allow 24 hours for thorough drying.

MAINTENANCE

Timber treated with AUSSIE CLEAR will not blacken when maintained regularly. However, over time and depending on the severity of exposure, the rich colour of the timber will fade. Repeat applications are simple as the timber can be re-oiled to bring back the rich natural timber texture.

COVERAGE

Sawn approx 8 m2/Litre.

Dressed approx 12 m2/Litre

CLEAN UP

Mineral Turpentine

PACKAGING

Aerosol Can

1, 4 and 20 litre cans and 200 litre drums.

Safety Instructions

Avoid skin contact by wearing protective clothing. Don't breathe vapour of spray mist.

First Aid Instructions

If poisoning occurs, contact a doctor or Poison Information Centre (13 11 26).

Eyes

Hold eyes open, flood with water for at least 15 minutes - see a doctor.

Skin

Remove contaminated clothing and wash skin thoroughly with soapy water.

Inhalation

Remove to fresh air.

If Swallowed

DO NOT induce vomiting. Give a glass of water to drink and transport to hospital.